Purpose:

It is used for washing all kinds of soft and hard endoscopes and surgical instruments. It is equipped with eight functional washing nozzles to facilitate the use of various departments such as the hospital endoscopy room and supply room.

Main performance features:

Convenient: the nozzle can be disassembled freely. It is suitable for the washing of medical instruments in all departments of the hospital. It can clean endoscopes and surgical instruments with different diameters. Eight multi-function nozzles, which can connect different water outlets

Shortcut: quick connect nozzle makes it easy to change nozzle, shortens flushing time and improves working efficiency.

Safety: specially designed for medical endoscope and various surgical instruments.

usage method:

Connect the connecting pipe of the high-pressure water gun to the outlet of the water pipe, and open the valve to conduct high-pressure washing or spraying. For different endoscopic pipes, surgical instruments and glassware, different nozzles can be replaced to control water pressure and spray angle, so as to completely remove dirt.

A mixing nozzle for mixing other small solutions with vacuum water pump

B deep cone nozzle for narrow mouth glassware

C-tip nozzle for pipes and conduits of various diameters

D fine plug type nozzle for syringe and trocar with luer connector;

E short conical spray nozzle for liquid guide pipe

F silica gel cover type nozzle for liquid guide pipe;

G spray type spray, used for spraying the surface of instruments

H coarse plug nozzle for syringes and thimbles with connectors

Jk-88 high-pressure water gun is designed and manufactured according to the cleaning characteristics of tubular instruments, with 8 unique nozzles.

Scope of application:

1. Cleaning of soft endoscope, hard endoscope and lumen instruments

2. All kinds of catheters, needles, syringes, 3 kinds of pipettes, glassware, drainage tubes, etc

usage method:

One end of the quick connector of the 6m spring connecting pipe is connected to the tail of the high-pressure water gun. Just pull down the quick connector a little and then insert the tail of the high-pressure water gun, and pull up. The other end of the spring pipe is connected with a 4-minute outer wire to a 4-minute tap water pipe. At the same time, according to the needs of the instrument, it can be used with a suitable nozzle.

Technical parameters:

Water source conditions: the water quality of the water source meets the sanitary standard for drinking water (GB5749-2006), and the pressure is 0.1-0.4mpa

to configure:

Jk-88 spray gun: 1 multi-functional nozzle; 8 different quick connectors for cleaning nozzle inlet; 1 6m spring connecting pipe; 1 4-minute outer wire and 1.